DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY
📄 Project Abstract
Nigeria is one of the top oil-producing nations in the world but processing this oil into finished products has been a major challenge for the countries. Fluid Catalytic Cracking (FCC) Units of Nigerian Refineries produced petroleum products at far below their installed capacities.This work is aimed at effective design and fabrication of a mini FCC Unit. The FCCU was designed to process 0.56bbl/hr of Escravos gas oil and fabrication of same was carried out. Equipments fabricated include Feed Surge Drum (Diameter 0.631m and Height 1.002m), Feed/LCO Heat Exchanger (Shell Diameter 0.260m, Tube Diameter 0.030m and Exchanger Length 1.000m), Feed/DCO Heat Exchanger(Shell Diameter 0.275m, Tube Diameter 0.0245m and Exchanger Length 1.000m) , Feed/Slurry Heat Exchanger(Shell Diameter 0.260m, Tube Diameter 0.024m and Exchanger Length 1.000m) , Feed Fired Heater (Base Diameter 0.872m, Height 1.745m and Tube Diameter 0.024m), Riser Reactor (Diameter 0.545m and Height 1.817m), Main Fractionator (Co...
🔍 Key Research Areas Covered
- ✅ Literature Review & Theoretical Framework
- ✅ Research Methodology & Data Collection
- ✅ Data Analysis & Statistical Methods
- ✅ Findings & Results Discussion
- ✅ Recommendations & Conclusions
- ✅ References & Bibliography
📚 Complete Project Structure
- Problem Statement & Objectives
- Theoretical Framework & Related Studies
- Data Collection & Analysis Methods
- Findings & Statistical Analysis
- Recommendations & Future Research
- Questionnaires, Data, References
⭐ Why Choose This Chemical Engineering Project Topics Project?
🎯 Well-Researched
Thoroughly researched with current and relevant sources
📊 Complete Data
Includes statistical analysis and detailed findings
✍️ Original Content
100% original research with proper citations
📝 Properly Formatted
APA/MLA formatting with table of contents
🎓 Supervisor Approved
Meets university standards and requirements
⚡ Instant Download
Immediate access after purchase
🔗 Related Chemical Engineering Project Topics Project Topics
💬 What Students Say
"This project provided excellent guidance for my Chemical Engineering Project Topics research. The methodology was clear and the data analysis helped me understand the proper approach."
DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY
Full Citation:
MUKHTAR SHEHU. (). DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY. African and General Studies, 40, 14858.
Citation Formats:
APA
MUKHTAR SHEHU. (). DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY. African and General Studies, 40, 14858.
MLA
MUKHTAR SHEHU. "DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY." African and General Studies, vol. 40, , pp. 14858.
Chicago
MUKHTAR SHEHU. "DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY." African and General Studies 40 (): 14858.
Full Citation:
MUKHTAR SHEHU. (). DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY. African and General Studies, 40, 14858.
Citation Formats:
APA
MUKHTAR SHEHU. (). DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY. African and General Studies, 40, 14858.
MLA
MUKHTAR SHEHU. "DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY." African and General Studies, vol. 40, , pp. 14858.
Chicago
MUKHTAR SHEHU. "DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY." African and General Studies 40 (): 14858.
Document Details
| Author | MUKHTAR SHEHU |
|---|---|
| 📁 Field | Chemical Engineering Project Topics |
| 🏷️ Type | Engineering Project Topics |
| Pages | 205 Pages |
| Words | 29043 words |
| 📘 Chapters | 1 to 5 Chapters |