DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE
📄 Project Abstract
There is a defined level of ionizing radiation (effective dose of 50mSv in any single year) that radiation workers are allowed to be exposed to, according to the International Committee on Radiation Protection (I.C.R.P) proposal which is duly adopted by International Atomic Energy Agency. Gas detectors are commonly used for radiation monitoring because of their ease of operation. In principle, a gas detector can be operated as an Ionization chamber, a Proportional counter, or a Geiger- Mueller tube, depending on the level of high voltage bias supply it is subjected to. Geiger - Mueller detectors are preferred for radiation monitoring because of their ability to detect nearly all kinds of ionizing radiation and they provide a very strong signal that a pre-amplifier is not necessary. This work has utilized the characteristics of G-M tubes to design and construct a Radiation alarm device capable of detecting unsafe radiation level in its vicinity. The device is intended for both indoor an...
🔍 Key Research Areas Covered
- ✅ Literature Review & Theoretical Framework
- ✅ Research Methodology & Data Collection
- ✅ Data Analysis & Statistical Methods
- ✅ Findings & Results Discussion
- ✅ Recommendations & Conclusions
- ✅ References & Bibliography
📚 Complete Project Structure
- Problem Statement & Objectives
- Theoretical Framework & Related Studies
- Data Collection & Analysis Methods
- Findings & Statistical Analysis
- Recommendations & Future Research
- Questionnaires, Data, References
⭐ Why Choose This Electrical Engineering Project Topics Project?
🎯 Well-Researched
Thoroughly researched with current and relevant sources
📊 Complete Data
Includes statistical analysis and detailed findings
✍️ Original Content
100% original research with proper citations
📝 Properly Formatted
APA/MLA formatting with table of contents
🎓 Supervisor Approved
Meets university standards and requirements
⚡ Instant Download
Immediate access after purchase
🔗 Related Electrical Engineering Project Topics Project Topics
💬 What Students Say
"This project provided excellent guidance for my Electrical Engineering Project Topics research. The methodology was clear and the data analysis helped me understand the proper approach."
DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE
Full Citation:
HAMISU ABUBAKAR ADAMU. (). DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE. African and General Studies, 40, 14858.
Citation Formats:
APA
HAMISU ABUBAKAR ADAMU. (). DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE. African and General Studies, 40, 14858.
MLA
HAMISU ABUBAKAR ADAMU. "DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE." African and General Studies, vol. 40, , pp. 14858.
Chicago
HAMISU ABUBAKAR ADAMU. "DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE." African and General Studies 40 (): 14858.
Full Citation:
HAMISU ABUBAKAR ADAMU. (). DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE. African and General Studies, 40, 14858.
Citation Formats:
APA
HAMISU ABUBAKAR ADAMU. (). DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE. African and General Studies, 40, 14858.
MLA
HAMISU ABUBAKAR ADAMU. "DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE." African and General Studies, vol. 40, , pp. 14858.
Chicago
HAMISU ABUBAKAR ADAMU. "DESIGN AND CONSTRUCTION OF RADIATION ALARM DEVICE." African and General Studies 40 (): 14858.
Document Details
| Author | HAMISU ABUBAKAR ADAMU |
|---|---|
| 📁 Field | Electrical Engineering Project Topics |
| 🏷️ Type | Engineering Project Topics |
| Pages | 87 Pages |
| Words | 10572 words |
| 📘 Chapters | 1 to 5 Chapters |