Petroleum Engineering Project Topics Books - Research Topics & Academic Projects

A CASE STUDY OF NATURAL FLOW AND TUBING STRING DESIGN FOR A WATER DRIVE RESERVOIR

The design of natural flow and artificial lift tubing strings for the whole life of a water drive reservoir was carried out using data based on synthetic reservoir performance based …

Petroleum Engineering Project Topics

A REVIEW OF APPLICATION OF PRESSURE DERIVATIVE CONCEPT TO MULTIRATE TESTS

Pressure build-up data in low permeability reservoirs take too long and are usually of poor quality. A pressure buildup test is perhaps the most widely performed transient test. In pressure …

Petroleum Engineering Project Topics

A REVIEW OF THE RHEOLOGICAL EFFECTS OF POWER LAW DRILLING FLUIDS ON CUTTINGS TRANSPORTATION IN NON-VERTICAL BOREHOLES

Cuttings transportation during in non-vertical boreholes is necessary for oil and gas wells. Adequate cuttings removal from a well in drilling is critical for cost-effective drilling as high annular cuttings …

Petroleum Engineering Project Topics

A STUDY OF THE EFFECT OF LIQUID FLOW RATE, PIPE SIZE AND PIPE ORIENTATION ON THE LIQUID HOLD-UP USING BEGGS AND BRILL CORRELATION

The effect of liquid flow rate, pipe size (diameter) and pipe orientation (inclination) on liquid hold-up was investigated. Liquid flow rate between 500 STB/day and 5000 STB/day was studied. An …

Petroleum Engineering Project Topics

ABRASIVE WEAR STUDIES OF PACK CYANIDED MILD STEEL (PCMS)

This work aimed at using processed cassava leaves to pack cyanide mild steel (MS) under different treatment conditions and investigating the wear properties of the pack cyanided mild steel (PCMS). …

Petroleum Engineering Project Topics

AN APPROACH TO IDENTIFYING THE OPTIMAL TIME TO INITIATE STIMULATION OPERATIONS.

Well stimulation is being utilized throughout the world in an attempt to increase oil and gas production rates by maximizing reservoir energy, increasing the effective wellbore radius, increasing permeability and …

Petroleum Engineering Project Topics

AN Approach to stimulation candidate selection and optimization

Well stimulation consists of several methods used for enhancing the natural producing ability of the reservoir when production rate declines. A detailed literature review of some of the well published …

Petroleum Engineering Project Topics

AN EXPERIMENTAL MODEL TO PREDICT AND CONTROL OILFIELD EMULSION TIGHTNESS: A NOVEL APPROACH

Formation of water-in-oil emulsions are among the major challenges encountered by production and surface facilities engineers during the recovery of crude oil, especially in a large multi-wells system in both …

Petroleum Engineering Project Topics

APPLICATION OF MINIMUM CURVATURE METHOD TO WELLPATH CALCULATIONS

Directional drilling is the science and art of deviating a wellbore along a planned course to a subsurface target whose location is a given lateral distance and direction from the …

Petroleum Engineering Project Topics

APPLICATION OF SAFETY PROGRAM ELEMENTS TO RISK MANAGEMENT ANALYSIS IN CONSTRUCTION

Literally, risk simply means danger or hazard. Every activity in human endeavor is incumbent with its own risk or risks inimical to identify, analyze and mitigate such risk or risks …

Petroleum Engineering Project Topics

Petroleum Engineering Project Topics Research Topics

A CASE STUDY OF NATURAL FLOW AND TUBING STRING DESIGN FOR A WATER DRIVE RESERVOIR

A REVIEW OF APPLICATION OF PRESSURE DERIVATIVE CONCEPT TO MULTIRATE TESTS

A REVIEW OF THE RHEOLOGICAL EFFECTS OF POWER LAW DRILLING FLUIDS ON CUTTINGS TRANSPORTATION IN NON-VERTICAL BOREHOLES

A STUDY OF THE EFFECT OF LIQUID FLOW RATE, PIPE SIZE AND PIPE ORIENTATION ON THE LIQUID HOLD-UP USING BEGGS AND BRILL CORRELATION

ABRASIVE WEAR STUDIES OF PACK CYANIDED MILD STEEL (PCMS)

AN APPROACH TO IDENTIFYING THE OPTIMAL TIME TO INITIATE STIMULATION OPERATIONS.

AN Approach to stimulation candidate selection and optimization

AN EXPERIMENTAL MODEL TO PREDICT AND CONTROL OILFIELD EMULSION TIGHTNESS: A NOVEL APPROACH

APPLICATION OF MINIMUM CURVATURE METHOD TO WELLPATH CALCULATIONS

APPLICATION OF SAFETY PROGRAM ELEMENTS TO RISK MANAGEMENT ANALYSIS IN CONSTRUCTION

No topics found